1-17
Installing the Agilent 8702D
Step 12. Check the Operation
Figure1-10. Operation Check Connections
5Press PRESET, SYSTEM, SERVICE MENU, TESTS, EXTERNAL TESTS, EXECUTE TEST.
6Follow the prompts shown on the display, and then press CONTINUE.
7Press the up-arrow key, EXECUTE TEST, and then follow the prompts shown on
the display. Then press CONTINUE.
8Connect the equipment as shown in Figure 1-11 and press PRESET.
The test port return cable should have low-loss characteristics to avoid a deg-
radation in frequency response at higher frequencies.