Epson S1D13504 Examples of 256 Pixel Colors Using Linear LUT, Gray Shade Modes, Pixel Value Color

Page 20	Epson Research and Development
	Vancouver Design Center

This recommended palette assumes that you are using only bank 0 of the three color components. By programming in the above fashion the following colors will result:

Table 3-12: Examples of 256 Pixel Colors Using Linear LUT

Pixel Value	Color
(binary)
000 000 00	black
000 000 10	dark blue
000 100 00	dark green
000 100 10	dark cyan
100 000 00	dark red
100 000 10	dark magenta
100 100 00	dark yellow
100 100 10	gray

Pixel Value		Color
(binary)
000 000	00	black
000 000	11	bright blue
000 111	00	bright green
000 111	11	bright cyan
111 000	00	bright red
111 000	11	bright magenta
111 111	00	bright yellow
111 111	11	white

15 bpp Color

Since the Look-Up Table is bypassed in this mode, the LUT programming is unimportant. The colors on the display are derived from only the top 4 bits of each color combination. Resulting in a maximum of 212=4096 colors.

16 bpp Color

Since the Look-Up Table is bypassed in this mode, the LUT programming is unimportant. The colors on the display are derived from only the top 4 bits of each color combination. Resulting in a maximum of 212=4096 colors.

Gray Shade Modes

In gray shade mode, the S1D13504 treats the Green LUT as a 16 position, 4 bit wide monochrome LUT. Depending on the selected pixel size, this LUT will provide from 1 to 4 banks.

1 bpp Gray Shade

The S1D13504 has no true Black-and-White mode. 1 bpp Gray consists of a single bank of two entries. For Black-and-White mode, the LUT entry must be programmed as such:

.

Table 3-13: Recommended LUT Values for 1 bpp Gray Shades

Index	Look-Up Table
	Data
(hex)
	(hex)
00	00
01	0F

S1D13504	Programming Notes and Examples
X19A-G-002-07	Issue Date: 01/02/01