•Configure Queues (Sendmail Server/ Using Open Source Configuration Rules only ) (see Section : Configuring Queues)
•Configure Queue Performance (Sendmail Server/ Using Open Source Configuration Rules only) (see Section : Configuring Queue Performance)
•Configure Trusted Layer Security (TLS) (Sendmail Server/ Using Open Source Configuration Rules only) (see Section : Configuring Trusted Layer Security)
Configuring Mail Protocols
When you initially configure your system as a mail server, you are required to configure the SMTP protocol (see Section : Configuring the System as a Mail Server). After configuring the SMTP protocol (and completing the rest of the mail server configuration), you can reconfigure the SMTP protocol, or add the following additional protocols to the mail server configuration:
•Message Transport System (see Section : Configuring the MTS Protocol)
•DECnet Phase IV (see Section : Configuring the DECnet Phase IV Protocol)
•DECnet/OSI (Phase V) (see Section : Configuring the DECnet/OSI Protocol)
•
•X.25 (PSInet) (see Section : Configuring the X.25 Protocol)
To configure a mail protocol, do one of the following on the Configure Sendmail Server form:
•Select the protocol you want from the Available Protocols menu and click on Configure.
•Select the protocol you want from the Configured Protocols menu and click on Modify. The configuration form appropriate for the protocol you selected is displayed.
Creating and Deleting Pseudo Domain Aliases
A pseudo domain alias is used by Sendmail to determine the protocol that a mail message requires. The message is properly encapsulated by Sendmail before being sent out over the Internet.
If you configured your system to be a mail server, you can use the Administration utility to create one or more pseudo domain aliases for the MTS, DECnet/OSI, UUCP, and X.25 protocols.
To set up a pseudo domain alias for a protocol, follow these steps:
1.Under Mail on the Manage Components menu, choose Sendmail Server.
2.From the Sendmail Server Administration menu, choose Configure Sendmail Server.
3.On the Configure Sendmail Server menu, ensure that Server is selected and click on Configure.
4.On the Configure Server form, do one of the following:
•Select a new protocol from Available Protocols, and then click on Configure.
•Select a previously configured protocol from Configured Protocols, and then click on Modify.
The Configure Sendmail Protocol form is displayed.
5.Click on Pseudo Domain Alias.... The Pseudo Domain Alias form is displayed.
6.To add a new pseudo domain alias, type the name of the alias in the Alias field, and then click on Add. The new alias name is displayed in the Current Alias list box.
To delete an existing pseudo domain alias, click on the alias name in the Current Alias list box and click on Delete.
7.When you are finished adding or deleting pseudo domain aliases for this protocol, click on Submit to return to the protocol configuration form.
8.Continue to configure the protocol as described in Section : Configuring the MTS Protocol
94 Mail Delivery Administration