EQQE076E EQQE080E
EQQE076E THE INPUT ARRIVAL TIME SPECIFIED BY THE IA KEYWORD IS NOT VALID
Explanation: The IA keyword contains an invalid input arrival value. The value must be specified in the format
YYMMDDHHMM where:
YYMMDD Is the input arrival date:
YY Is year and must specified as 72 to 99 for years 1972 to 1999 or 00 to 71 for years 2000 to
2071.
MM Is the month number and must be in the range 01 to 12.
DD Is the day number and must be in the range 01 to 31.
HHMM Is the input arrival time:
HH Is the hour number and must be in the range 00 to 23.
MM Is the minute number and must be in the range 00 to 59.
System action: The event will not be created. The EQQEVPGM program continues processing the next statement.
User response: If the event should be created, correct the IA keyword and resubmit the EQQEVPGM batch job.
EQQE077E WORK STATION NAME (WSNAME KEYWORD) MUST BE SPECIFIED
Explanation: The current OPSTAT or WSSTAT event definition statement does not define any workstation name.
This name is required.
System action: The event will not be created. Processing ends if it was invoked by a current TSO command. If the
command was invoked by the EQQEVPGM program, processing continues with the next statement.
User response: If the event should be created, make the necessary corrections and reissue the command.
EQQE078E THE EVENT DURATION TIME SPECIFIED BY THE DURATION KEYWORD IS NOT VALID
Explanation: The DURATION keyword contains an invalid duration value. Event duration must be specified in the
format HHMM, where:
HH Is a two-digit hour number. It must be in the range 00–99.
MM Is a two-digit minute number. It must be in the range 00–59.
System action: The event will not be created. The EQQEVPGM program continues processing the next statement.
User response: If the event should be created, make the necessary corrections and resubmit the EQQEVPGM
batch job.
EQQE079E KEYWORD
KEY
HAS AN INVALID VALUE
Explanation: The only valid values for the CREATE and AVAIL keywords are YES, NO, or RESET or abbreviations
of YES, NO, or RESET.
System action: The event will not be created. Processing ends for current SRSTAT command. If SRSTAT is
invoked by the EQQEVPGM program then processing continues with the next statement.
User response: If the event should be created, make the necessary corrections and reissue the SRSTAT command.
EQQE080E THE EQQMINOR PROGRAM ABENDED WITH ABEND CODE
ABEND
Explanation: This message is issued when an TME 10 OPC TSO command has failed due to an error when
communicating with the TME 10 OPC subsystem.
Problem determination: If necessary, generate a dump by allocating a SYSxDUMP dataset to the TSO user's
address space, or by defining a slip trap, and reissue the failing command.
User response: Contact your systems programmer.
System programmer response: If the failing command contains an error, correct it and retry. If the error cannot be
corrected, contact your IBM representative for assistance.
Chapter 8. EQQEnnn Messages 95