EQQR618W EQQR626E
EQQR618W REQUEST TO SET THE STATUS TO ERROR IS IGNORED
Explanation: You have attempted to set an operation in the current plan to ended-in-error status but the operation is
already set to that status.
System action: The request is ignored.
User response: None.
EQQR619W REQUEST TO SET THE STATUS TO COMPLETE IS IGNORED
Explanation: You have attempted to set an operation in the current plan to “complete” status but the operation has
already completed.
System action: The request is ignored.
User response: None.
EQQR620W THE INTERRUPT REQUEST IS IGNORED
Explanation: You have attempted to interrupt an operation in the current plan, but the operation has already been
interrupted.
System action: The request is ignored.
User response: None.
EQQR621E DURATION REQUIRED FOR OPERATIONS THAT HAVE NOT BEEN STARTED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You must specify a duration for operations that have not started.
EQQR622E AN OPERATION WAITING FOR ARRIVAL CANNOT BE RESET
Explanation: You have attempted to reset an operation that is waiting for arrival. This is not allowed.
System action: The system waits for you to respond.
User response: Enter a valid status or leave blank.
EQQR623E AN OPERATION WITH READY STATUS CANNOT BE RESET
Explanation: You have attempted to reset an operation that is ready. This is not allowed.
System action: The system waits for you to respond.
User response: Enter a valid status or leave blank.
EQQR624E OP BEING UPDATED BY ANOTHER USER, REQUEST IS REJECTED, RSNC:
XSSRS
Explanation: The operation can either not be read from the current plan or has another status, real duration, or error
code than is displayed. In both cases, the operation has been changed from its condition in the ready list.
System action: The ready list is refreshed and the system waits for you to respond.
User response: Review the operation, and if it is still valid, reenter the request.
EQQR626E THE REQUESTED STATUS CHANGE MUST BE DONE VIA A RESET REQUEST
Explanation: The intended status change is not supported. You must first enter a reset request, then a request to
get the desired status.
System action: The ready list is displayed.
User response: Enter the row command R and then enter N-
x
, where
x
is the required status.
256 TME 10 OPC Messages and Codes