EQQV029I EQQV037I
EQQV029I VTAM TERMINATION, OR NCF DEACTIVATION, STOPPED SESSION SETUP ATTEMPTS
Explanation: Session initiation attempts were stopped because VTAM is terminating, or the NCF application was
deactivated.
System action: NCF continues termination processing.
User response: None.
EQQV031I SUBSYSTEM STOP REQUEST TERMINATED SESSION SETUP ATTEMPTS
Explanation: A remote NCF application was in the process of initiating a session when the subsystem was stopped.
System action: NCF termination processing continues.
Operator response: None.
EQQV032I SUBSYSTEM STOP REQUEST TERMINATED ACB OPEN ATTEMPTS
Explanation: NCF was in the process of establishing contact with VTAM when the subsystem was stopped.
System action: NCF termination processing continues.
Operator response: None.
EQQV033E ACB OPEN FAILED FOR THE LAST 2 MINUTES - NCF APPLICATION NOT ACTIVE
Explanation: NCF failed to establish contact with VTAM during the last two minutes because the NCF application
was not activated. NCF attempts to establish contact every 10 seconds until contact is made. This message is
issued every two minutes until contact is established.
System action: NCF continues to attempt to establish contact with VTAM until contact is made, or until the TME 10
OPC subsystem is stopped.
System programmer response: Have the network operator activate the VTAM LUs.
EQQV034E
NAMEREQ
REQUEST FAILURE - LU/APPLICATION
NODE
INHIBITED
Explanation: The VTAM
NAMEREQ
request failed to complete successfully because the LU-name
NODE
was
inhibited. The most likely reason for the failure is that the cross-domain NCF partner
NODE
has been deactivated, or
the partner VTAM system has been taken down.
System action: If
NAMEREQ
is the REQSESS request, then NCF processing continues with session establishment
attempts every 10 seconds. For other VTAM requests, NCF processing is terminated.
System programmer response: Have the network operator activate the VTAM and/or NCF application on the
cross-domain partner system.
EQQV036I SESSION
HOME
-
DEST
ESTABLISHED
Explanation: A session has been established between the home application
HOME
and the destination application
DEST
.
System action: NCF processing continues.
Operator response: None.
EQQV037I SESSION
HOME
-
DEST
ENDED
Explanation: The session between the home application
HOME
and the destination application
DEST
has ended.
System action: NCF processing continues.
Operator response: None.
288 TME 10 OPC Messages and Codes