IBM SH19-4480-01

EQQSU13E  EQQSU21E

EQQSU13E THE OPC/ESA STARTED TASK FILE, DDNAME=EQQSTC, COULD NOT BE OPENED FOR OUTPUT

Explanation: The submit task was unable to open the started task temporary proclib dataset. This file is defined by

the DD statement EQQSTC in the JCL procedure used to start the TME 10 OPC subsystem.

System action: If the error is discovered during the start of TME 10 OPC, the submit task issues message

EQQSU04 and terminates. When the error is discovered during submit of a started task, this message is followed by

message EQQW759W and the submit task stops submitting started tasks.

Problem determination: Check that DD statement EQQSTC is correctly specified in the startup procedure. Verify

that the TME 10 OPC subsystem is authorized to open the temporary proclib dataset for output. If RACF is installed,

determine if the MVS SYSLOG file contains an ICH408 access violation message for the temporary proclib dataset.

System programmer response: Ensure that the TME 10 OPC subsystem is properly authorized to use the

temporary proclib dataset, and that the EQQSTC DD statement is correctly defined, then restart either the submit task

or the TME 10 OPC subsystem.

EQQSU20E UNABLE TO READ EQQEVDS HEADER RECORD FOR REQUEST TYPE

DQETYPE

WORKSTATION

WSNAME

Explanation: The submit task was unable to execute a submit checkpoint request for the reason stated. Request

type can be one of:

J0 Request for submit checkpoint sequence number

J1 Job submit checkpoint request

J2 STC start checkpoint request

WTO Message checkpoint request.

System action: The submit task continues normal processing.

Problem determination: Review earlier messages in the message log to determine the cause of the error.

System programmer response: If necessary, stop TME 10 OPC, take corrective action, then restart TME 10 OPC.

EQQSU21E UNABLE TO UPDATE EQQEVDS HEADER RECORD FOR REQUEST TYPE