EQQ9987W EQQ9989E
|EQQ9987W OPERHISTORY IS NO BUT RELATED PARAMETERS ARE SPECIFIED: IGNORED
|Explanation: The BATCHOPTS statement specifies the DB2SYSTEM, CONTROLLERTOKEN, DB2AVAIL, or
|RETAINOPER parameters, either without specifying the OPERHISTORY keyword or with OPERHISTORY set to NO.
System action: The daily plan program is terminated.
|System programmer response: Check whether the history function is intentionally disabled or whether the
|OPERHISTORY keyword was omitted. If the OPERHISTORY keyword was omitted, add it, setting the value to YES.
EQQ9988I DB2SYSTEM
DB2SYS
IS NOT AVAILABLE
|Explanation: The DB2 system specified in the DB2SYSTEM keyword of the BATCHOPTS statement is not started,
|has been stopped, or has abended, or the specified name is incorrect.
System action: Daily plan processing continues, but no operations are inserted into the history database.
System programmer response: Check the reason for the failure, then correct the problem.
|EQQ9989E DB2 MODULE
MODNAME
LOAD FAILED
|Explanation: DB2 module
MODNAME
failed to load during the daily planning batch run.
|System action: The daily planning batch job is stopped.
|System programmer response: Check the reason for the failure, then correct the problem.
478 TME 10 OPC Messages and Codes