EQQCL45W EQQCL4CW
|EQQCL45W Occurrence not found in the LTP: APPL(
appl
) IA(
iadt
)
|Explanation: OCL attempted to modify or list the application occurrence
appl
, which does not exist in the long term
|plan.
iadt
is the input arrival date and time used to search for the occurrence.
|System action: OCL processing continues.
|User response: Verify that the selection parameters are correct.
|EQQCL46W Only OCL instructions are accepted:
sysin_line
|Explanation: A non-OCL instructions was specified, and the initialization parameter TSOCMD is set to NO.
|System action: OCL processing continues.
|User response: If you want the user to be able to specify TSO commands or REXX instructions other than those of
|OCL, set the TSOCMD parameter to YES.
|EQQCL47W Oper. not found or not in Error:
opnum
APPL(
appl
) IA(
iadt
)
|Explanation: The application occurrences
appl
with input arrival date and time
iadt
does not contain the selected
|operation or the selected operation is not in error status.
|System action: OCL processing continues.
|User response: Verify that the selected operation really exists in the application occurrence.
|EQQCL48W Error code
errcode
does not match ERRCODE() for operation
opnum
|Explanation:
errcode
is the error code specified in the CHKAPPL instruction for operation
opnum
. OCL found the
|operation
opnum
in error status, but its error code does not match
errcode
.
|System action: OCL processing continues.
|User response: None.
|EQQCL49W Operation
opnum
is not in HOLD status
|Explanation: OCL tried to release an operation that was not manually held.
|System action: OCL processing continues.
|User response: None.
|EQQCL4AW Operation
opnum
is already in HOLD status
|Explanation: OCL tried to hold an operation that was already in HOLD status.
|System action: OCL processing continues.
|User response: None.
|EQQCL4BW Operation
opnum
is not in NOP status
|Explanation: OCL issued an UNNOP command against an operation that was not in NOP status.
|System action: OCL processing continues.
|User response: None.
|EQQCL4CW Operation
opnum
is already in NOP status
|Explanation: OCL issued a NOP command against an operation that was already in NOP status.
|System action: OCL processing continues.
|User response: None.
48 TME 10 OPC Messages and Codes