EQQM172E EQQM204E
EQQM172E MAXIMUM NUMBER OF OCCURRENCES EXISTS, FAILED TO ADD
AD
|Explanation: No more occurrences can be added to the Current Plan because the maximum number of
|occurrences—32767 or the number specified in the MAXOCCNUM option of the JTOPTS statement—has been
|reached.
System action: The request is rejected.
Problem determination: If you use ETT, PIF, or Automatic Recovery, check that these functions are working
correctly. For example, make sure that you do not have an endless ETT loop where the availability of a special
resource is set to YES by a job that ETT adds when it detects that this same resource is set to YES. Check the
Current Plan for instances of an unusually high number of occurrences of a particular application. If you see such an
application, look in the application description data base and make sure that the run cycles for the application are
correct. When you specify PREVRES(YES) on the BATCHOPT initialization statement, information about completed
and deleted occurrences is carried forward, for reporting purposes, into a new Current Plan. If your Current Plan
regularly contains a large number of occurrences, and you specify YES for PREVRES, you should consider changing
this value to NO.
User response: Check that the current plan does not contain any occurrences that should not be in the plan. If you
find any such occurrences, complete or delete them. Replan the Current Plan to remove all completed and deleted
occurrences, and then try to add the occurrence again. If your Current Plan regularly contains a large number of
occurrences, you should consider shortening the length of the Current Plan in future daily planning runs.
EQQM173W CHANGING INPUT ARRIVAL MAY CAUSE EDITED JCL TO BE LOST
Explanation: The JCL for an operation in this occurrence has been edited. Changing input arrival for this
occurrence may cause the edited JCL to be lost.
System action: The system waits for you to respond
User response: To keep the edited JCL, change the input arrival back to the original value and press ENTER. If
you need the input arrival to change acknowledge this by pressing ENTER, this may cause the JCL you edited to be
lost.
EQQM200E THE SPECIFIED WORK STATION ID DOES NOT EXIST
Explanation: Data entry error; see “Data Entry Errors” on page 2.
|EQQM201E THE OPERATION NUMBER MUST BE BETWEEN 1 - 255
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM202E THE JOBNAME MUST BE IN THE FORMAT CAAAAAAA
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A job name can be made up of the following valid characters: A through Z, 0 through 9, and national characters (that
is, #, $, and @). The first character must be alphabetic or national, the remaining characters can be alphabetic,
numeric, and national characters.
EQQM203E JOB SETUP, COMPUTER, AND PRINT OPERATIONS REQUIRE A JOBNAME
Explanation: A jobname must be given for an operation at a general workstation with the job setup option, or at a
computer or printer workstation.
System action: The panel is redisplayed.
User response: Specify a jobname for the operation.
EQQM204E A DURATION MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Chapter 16. EQQMnnn Messages 181