EQQA410E EQQA500E
EQQA410E THE JOB DIALOG CANNOT BE USED WHEN DBCS IS DEFINED FOR APPLID
Explanation: You have tried to enter the job description dialog but DBCS bracketed input has been defined for
application IDs in your installation. The application ID of job descriptions must be the same as the job name. Job
names cannot be entered in DBCS bracketed format.
System action: The panel is redisplayed with this error message.
User response: Use the application description dialog instead.
EQQA411E WORK STATION MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The workstation pointed to by the cursor must be entered.
EQQA412E WORK STATION SPECIFIED IS NOT A VALID JCL PREPARATION WORK STATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The workstation must be a workstation with the JCL preparation indicator set to Y.
EQQA413E WORK STATION SPECIFIED IS NOT A VALID MANUAL WORK STATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The workstation must be a MANUAL workstation.
EQQA414E 24.00 NOT ALLOWED AS A FROM-RUN TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA415E NO PREDECESSORS FOUND THAT MATCH SELECTION CRITERIA
Explanation: You tried to select predecessors for a job. No predecessors were found with the specified selection
criteria.
System action: The request is rejected.
User response: None.
EQQA416E 00.00 NOT ALLOWED AS A TO-RUN TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA418E FROM-RUN TIME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Either a run time has been entered, or run cycles are missing. Therefore, a from run time must be specified.
EQQA419E INTERNAL PREDECESSORS ARE NOT ALLOWED FOR JDS
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The application ID must be completed for a predecessor if you are currently defining a job.
EQQA500E GROUP DEFINITION CANNOT HAVE OPERATIONS
Explanation: A group definition cannot contain operations.
System action: The system waits for you to respond.
User response: Change application type to A if operations are to be defined in this application.
Chapter 3. EQQAnnn Messages 27