EQQC001I EQQC006E
EQQC001I THE AUTOMATIC RECOVERY SUBTASK HAS STARTED
Explanation: The automatic job recovery subtask has been successfully initialized.
System action: Automatic job recovery processing is started.
User response: None.
EQQC002E THE AUTOMATIC RECOVERY INITIALIZATION FAILED
Explanation: The automatic job recovery subtask was not initialized because there is an error in the AROPTS
initialization statement.
System action: Automatic job recovery initialization is terminated.
Problem determination: This message is preceded by a message in the TME 10 OPC message log giving the
reason for this error message.
User response: Contact your system programmer.
System programmer response: Correct the error in the AROPTS initialization statement and then restart TME 10
OPC.
EQQC003I THE AUTOMATIC RECOVERY SUBTASK HAS ENDED NORMALLY
Explanation: This message is issued when the TME 10 OPC subsystem is being stopped by an operator command.
System action: The TME 10 OPC termination processing continues.
User response: None.
EQQC004E STARTTIME OR ENDTIME OPTION
TIME
IN AROPTS STATEMENT IS NOT VALID
Explanation: The STARTTIME or ENDTIME option in the AROPTS initialization statement is not specified in a valid
TME 10 OPC time format. The option
TIME
must be a 4-digit decimal number in the format HHMM, where HH is
from 00 through 23, and MM is from 00 through 59.
System action: Automatic job recovery initialization is terminated.
User response: Correct the STARTTIME or ENDTIME value in the AROPTS initialization statement. Then stop
TME 10 OPC and restart it.
EQQC005E THE AUTOMATIC RECOVERY INITIALIZATION FAILED, MODULE EQQCASEM NOT FOUND
Explanation: The initialization of the automatic job recovery subtask failed because the load module EQQCASEM
could not be found in a library accessible to TME 10 OPC.
System action: Automatic job recovery initialization is terminated.
User response: Contact your system programmer.
System programmer response: Make sure that the load module EQQCASEM is present in a library that can be
accessed by TME 10 OPC. Then stop the TME 10 OPC started task and restart it.
EQQC006E HOUR AND MINUTE MUST BOTH BE TWO-DIGIT NUMBERS
Explanation: A nonnumeric time value has been specified.
System action: Processing continues.
System programmer response: Reenter a numeric time value.
Copyright IBM Corp. 1991, 1998 31