EQQ0837W EQQ0845W
EQQ0837W FIRST INPUT RECORD NOT HEADER RECORD
Explanation: The first record encountered while creating operator instructions from a sequential input file is not a
header record.
System action: The job continues processing. All records up to the first valid header record are bypassed.
User response: Correct your input and then resubmit the job so that the bypassed instructions will also be created,
or use the Operator Instruction dialog to create the instructions.
EQQ0838W INVALID INPUT SYNTAX. NO KEY FIELD SPECIFIED
Explanation: A header record is encountered where no key field is specified.
System action: The job continues processing. All records up to the first valid header record are bypassed.
User response: Correct your input and then resubmit the job so that the bypassed instructions will also be created,
or use the Operator Instruction dialog to create the instructions.
EQQ0839W INVALID LENGTH
LEN
OF KEY FIELD. KEY:
NAME
NUMBER
Explanation: You specified a key field for the key
NAME
NUMBER
, but the length of the value you gave to it is too
large.
System action: The job continues processing. All records up to the first valid header record are bypassed.
User response: Correct your input and then resubmit the job so that the bypassed instructions will also be created,
or use the Operator Instruction dialog to create the instructions.
EQQ0840W INVALID LENGTH
LEN
OF VALFROM FIELD. INSTR.:
NAME
NUMBER
Explanation: You specified a valid-from field (for operator instruction
NAME
) that is less than 10 characters long.
System action: The job continues processing. All records up to the first valid header record are bypassed.
User response: Correct your input and then resubmit the job so that the bypassed instructions will also be created,
or use the Operator Instruction dialog to create the instructions.
EQQ0841W NO APPLICATION
NAME
FOUND FOR OPERATOR INSTRUCTION
Explanation: An operator instruction must contain a valid application name and operation number corresponding to
an existing application.
System action: The job continues processing but the instruction is not created; all records up to the next header
statement are bypassed.
User response: Add the corresponding application description, or change the application name if it is incorrectly
spelled.
EQQ0844W OPERATOR INSTRUCTION
NAME
NUMBER
ALREADY EXISTS
Explanation: The operator instruction (
NAME
) you attempted to add already exists in the operator instruction
database.
System action: The job continues processing but the instruction is not created; all records up to the next valid
header statement are bypassed.
User response: Modify the operator instruction using the Operator Instruction dialog.
EQQ0845W VALFROM > VALID TO DATE+TIME. INSTR.:
NAME
NUMBER
Explanation: The valid-from date you specified in the operator instruction
NAME
is later than the valid-to date and
time. The valid-from date must be
earlier
than the valid-to date.
System action: The job continues processing but the instruction is not created; all records up to the next valid
header statement are bypassed.
User response: Enter valid dates.
470 TME 10 OPC Messages and Codes