EQQR109E EQQR201I
EQQR109E THE LAYOUT
RLLAYOUT
CANNOT BE FOUND IN THE LAYOUT TABLE
Explanation: The layout
rllayout
does not exist.
System action: The system waits for you to respond.
User response: Select one of the layouts in the list or create a new one.
EQQR110E THE LAYOUT ID MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQR111E SELECT AN ITEM BY SPECIFYING
SELECT
OR A NUMBER 01-99
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQR112E LEAVE BLANK OR SPECIFY
OCHCYES
OR
OCHCNO
Explanation: Data entry error; see “Data Entry Errors” on page 2.
ochcyes
is the national language character for Y (yes);
ochcno
is for N (no).
EQQR120E NO LAYOUT WAS SELECTED,
RSRLT
IS USED
Explanation: The ready list was to be displayed using the default layout,
RSRLT
, the layout that was used last time
the ready list was displayed for the same workstation. That layout could not be found and the first layout in the layout
table is used.
System action: The ready list is displayed.
User response: You may change the layout ID if the used layout is not appropriate.
EQQR121E A LAYOUT MUST BE SELECTED TO DISPLAY ERROR LISTS.
Explanation: The Ended in Error List cannot be displayed without a layout ID.
System action: A panel listing the possible layouts is displayed.
User response: Select a layout from the selection list, or specify a valid ID in the layout input field.
EQQR200E INVALID PARAMETER WHEN CALLING MODULE
MODNM
Explanation: There is an invalid parameter in the input to the ready list module (module name
modnm
).
System action: The requested access to a ready list function is rejected.
Problem determination: This message indicates that there is an error in the current panel.
User response: Contact your system programmer.
System programmer response: Check that the panel has not been inadvertently overlayed in the panel library
(ISPPLIB).
EQQR201I RETURN CODE
URC
WAS RETURNED FROM READY LIST USER EXIT
Explanation: The active exit for this ready list layout ended with a return code greater than or equal to 8.
System action: The status is not changed.
User response: Contact the person responsible for ready list exit to determine the reason for the return code set.
Chapter 22. EQQRnnn Messages 253