EQQN053W EQQN070E
EQQN053W OCCURRENCE
occid
WITH IA
iadate iatime
MAY CONTAIN HELD OPERATIONS.
Explanation: An MCP multiple add request did not complete normally. TME 10 OPC has cancelled the wait for the
completing modify request. Operations within the reported occurrence may be in held status and must be released
manually.
System action: The wait for the modify request has been cancelled.
User response: Respond as for message EQQX146.
EQQN056I A CURRENT PLAN COPY PROCESS HAS STARTED
Explanation: The NMM has started to copy a current plan dataset, either because a new current plan has become
available, or because a current plan image copy backup is to be created.
System action: TME 10 OPC processing continues.
System programmer response: None.
EQQN057I A CURRENT PLAN DATA SET WAS SUCCESSFULLY COPIED: FROMDD=
FROMDD
, TODD=
TODD
Explanation: The NMM has finished copying a current plan dataset.
System action: TME 10 OPC processing continues.
System programmer response: None.
EQQN060E INVALID
KEYVAL
KEYWORD VALUE POSITION IN THE
KEYWORD
KEYWORD
Explanation: Keyword
KEYWORD
on the JTOPTS statement contains a valid value
KEYVAL
, but in an incorrect
position.
System action: The normal mode manager (NMM) terminates.
System programmer response: Correct the error and restart the NMM subtask or the TME 10 OPC subsystem.
Refer to the
TME 10 OPC Customization and Tuning
for a description of the keyword.
EQQN061E TOO MANY KEYWORD VALUES IN THE
KEYWORD
KEYWORD
Explanation: Keyword
KEYWORD
on the JTOPTS statement contains too many values.
System action: The normal mode manager (NMM) terminates.
System programmer response: Correct the error and restart the NMM subtask or the TME 10 OPC subsystem.
Refer to the
TME 10 OPC Customization and Tuning
for a description of the keyword.
EQQN062E The
KEYWORD
KEYWORD CONTAINS UNKNOWN KEYWORD VALUE
KEYVAL
Explanation: Keyword
KEYWORD
on the JTOPTS statement contains a value
KEYVAL
, which is not recognized by
TME 10 OPC.
System action: The normal mode manager (NMM) terminates.
System programmer response: Correct the error and restart the NMM subtask or the TME 10 OPC subsystem.
Refer to the
TME 10 OPC Customization and Tuning
for a description of the keyword.
EQQN070E
KEYVALUE
IS NOT A VALID
KEYWORD
VALUE
Explanation: An invalid keyword value has been defined.
System action: TME 10 OPC uses the default keyword value.
Problem determination: Contact your TME 10 OPC administrator.
TME 10 OPC administrator response: Correct the value for the keyword containing the error and restart TME 10
OPC.
Chapter 17. EQQNnnn Messages 223