EQQQ502I EQQQ505E
EQQQ502I SPECIAL RESOURCE DATASPACE HAS BEEN CREATED.
SIZE
PAGES ARE USED FOR
NUM
SPECIAL RESOURCE RECORDS
Explanation: A data space has been successfully created for special resource records.
SIZE
shows the number of
pages (each 4096 bytes) used to create the data space.
NUM
shows the maximum number of special resource
records that the data space can contain.
TME 10 OPC uses a minimum of 20 pages.
System action: Normal processing continues. TME 10 OPC will use the data space when accessing special
resources.
System programmer response: None.
EQQQ503E SPECIAL RESOURCE DATASPACE CREATION FAILED. REASON CODE IS
REASON
.
SIZE
PAGES
WERE REQUESTED FOR
NUM
SPECIAL RESOURCES
Explanation: TME 10 OPC could not create a data space for special resource storage. Reason code
REASON
is
set by the DSPSERV service.
SIZE
shows the number of pages (each 4096 bytes) that TME 10 OPC needed.
NUM
shows the number of special resource records that TME 10 OPC wanted to store in the data space.
System action: If the error occurred in batch, the batch program terminates. If the error occurred in the controller
the normal mode manager (NMM) terminates.
Problem determination: Use the reason code
REASON
from DSPSERV to determine the cause of the error. Refer
to the MVS/ESA documentation that describes DSPSERV reason codes.
System programmer response: Correct the error and restart the NMM subtask. Or resubmit the batch job, if the
error occurred in batch.
EQQQ504I
STAT
SPECIAL RESOURCE
RESNAME
HAS BEEN DYNAMICALLY ADDED BY
USER
Explanation: A requested special resource
RESNAME
did not exist in the current plan, but has been dynamically
added to the special resource data space by user or function
USER
. Status
STAT
=NEW means that the special
resource did not previously exist in the RD database. Status
STAT
=OLD means that the special resource had already
been defined. Note that the DYNAMICADD keyword of the RESOPTS statement has no effect if the special resource
already exists in the RD database.
This message can be issued at daily planning, when an operation becomes ready, or when a special resource event
record is processed.
System action: Normal processing continues. TME 10 OPC increases the quantity of a dynamically created special
resource if another operation allocates the special resource with a larger value, or to avoid contention.
User response: None.
EQQQ505E UNSUCCESSFUL DATASPACE ACCESS REQUEST, INFORMATION FOLLOWS:
ACCESS REQUEST IS FROM
MODID
, REASON CODE IS
RSN
,
REQUESTED FUNCTION IS
FUNC
, INDEX NUMBER IS
INDEX
Explanation: An TME 10 OPC subtask encountered an unexpected error when accessing a resource in the
resource data space.
System action: The messages that follow this message in the TME 10 OPC message log indicate the action taken
by the TME 10 OPC subtask.
System programmer response: Correct the error and, if necessary, restart the subtask that encountered the error.
240 TME 10 OPC Messages and Codes