EQQC028W EQQC045I
EQQC028W NO AUTOMATIC RECOVERY TEST BECAUSE ERROR IN RECOVER STATEMENT
Explanation: While automatic job recovery was checking whether or not recovery should be performed for a job that
ended in error, a RECOVER statement with a syntactical error was found. This message is followed by message
EQQC045I with reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: Review the JCL of the identified operation.
User response: Check the RECOVER statements for syntactical errors. Make sure that the operation is separated
from the operands by one or more blanks, and that the operands are separated by a comma. When you have found
and corrected the error, you can initiate a new automatic job recovery attempt for the job that ended in error by using
the ended-in-error list of the Modify Current Plan dialog.
EQQC029I NO AUTOMATIC RECOVERY BECAUSE RECOVER STATEMENT DOES NOT MATCH THIS ERROR
Explanation: While automatic job recovery was checking whether or not recovery should be performed for a job that
ended in error, one or more RECOVER statements were found but none matched the current error. This message is
followed by message EQQC045I with reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
User response: Consider if the error should be covered in the recovery scheme.
EQQC044I AUTO RECOVERY OF APPL
ADID
DATE
H
.
M
, OP
WSN
OP
JN
JID
Explanation: Automatic job recovery actions have been taken for the specified occurrence (application
ADID DATE
H. M
, operation
WSN OP
, where
DATE H. M
is the occurrence input arrival time). The specified JCL rebuild is made.
Restart, application addition, and release of successors are in process as specified in the RECOVER statement.
System action: The specified automatic recovery actions are started up.
User response: None.
EQQC045I AUTO RECOVERY INFO
RS
, APPL
ADID
DATE
H
.
M
, OP
WSN
OP
JN
JID
Explanation: Automatic job recovery is being performed for the job identified as application
ADID DATE H. M
,
operation
WSN OP
; where
DATE H. M
is the occurrence input arrival time). This message is issued to keep track of
a particular action taken during the recovery processing.
RS
is a reason code that stands for a certain error and/or action related to automatic job recovery. Message
EQQC047E has a list of the reason codes and their meanings.
System action: The specified automatic recovery actions are started up.
Problem determination: Review the JCL of the identified operation. Identify the recovery actions described in the
RECOVER statement of the JCL.
User response: Look up the meaning of reason code
RS
in the list given in message EQQC047E. Review the
action taken and see if it matches the action requested. If necessary, take the appropriate action.
Chapter 4. EQQCnnn Messages 35