EQQW523E EQQW529E
EQQW523E JOB
MEMBER
IN APPLICATION
APPL
IS TOO LARGE TO BE SAVED ON THE JS DATA SET
Explanation: A job that is about to be submitted to JES is too large to be saved in the JCL repository dataset.
System action: The job will be submitted but the JCL repository data will not be updated.
Problem determination: Use the IDCAMS LISTCAT function to determine the maximum size of records in the
dataset defined by the EQQJS
x
DS DD statement. Use dialog option 6.6 to determine the current JCL repository.
System programmer response: If necessary, allocate a new JCL repository dataset with a larger maximum record
size. Refer to
TME 10 OPC Customization and Tuning
for instructions.
|EQQW524E JOB
MEMBER
IN APPLICATION
APPL
COULD NOT BE SUBMITTED BECAUSE THE EQQUX001
|EXIT RETURNED A NONZERO ERROR CODE
|Explanation: The job submit exit was called and returned an error code different from '0000'.
|System action: The job is not submitted, and its error status is set to the error code that was returned by the submit
|exit job.
|User response: Check why the submit exit job, EQQUX001, stopped submission.
EQQW525E JOB
MEMBER
IN APPLICATION
APPL
COULD NOT BE SUBMITTED BECAUSE OF AN ERROR IN
THE JOB CARD
Explanation: TME 10 OPC has been requested to submit a job that has an incorrect job card.
System action: The job is not submitted.
User response: Correct the JCL for this job and use the Modify Current Plan dialog to restart the occurrence at the
failing operation.
EQQW526E JOB
MEMBER
IN APPLICATION
APPL
COULD NOT BE SUBMITTED BECAUSE NO JOB CARD
COULD BE FOUND
Explanation: TME 10 OPC has been requested to submit a job that does not have a job card.
System action: The job is not submitted.
User response: Correct the JCL for this job and use the Modify Current Plan dialog to restart the occurrence at the
failing operation.
EQQW527W THE JOB CARD OF JOB
MEMBER
IN APPLICATION
APPL
SPECIFIES JOB NAME
CURNAME
. THE
JOB IS SUBMITTED ANYWAY
Explanation: TME 10 OPC has been requested to submit a job whose name is different from the job name of the
current operation.
System action: TME 10 OPC submits the job without any changes.
User response: If the difference in job names is intentional then the message can be ignored. If the message is not
expected then make sure that the operation corresponding to this job has the correct status.
EQQW529E JOB
MEMBER
IN APPLICATION
APPL
COULD NOT BE SUBMITTED BECAUSE THE JOB CARD
SPECIFIES JOB NAME
CURNAME
Explanation: TME 10 OPC has been requested to submit a job that has a different name to that defined by the
corresponding operation. JOBCHECK(SAME) has been defined on the JTOPTS initialization statement.
System action: The job is not submitted.
User response: Change the JCL for this job to use the correct job name and use the MCP dialog to restart the
occurrence at the failing operation.
318 TME 10 OPC Messages and Codes