EQQY008W EQQY020W
EQQY008W STATEMENT
STM
IS BYPASSED DUE TO PARSER DETECTED ERROR
Explanation: The statement parser has detected an error in statement
STM
.
System action: Processing continues. The creation of the current record is abandoned, and the remaining
statements for the same record are bypassed.
Problem determination: The parser-detected error is given by the preceding message.
User response: Correct the error described by the previous message and rerun.
EQQY009W STATEMENT
STM
IS PROCESSED IN SCAN MODE DUE TO ERROR IN PREVIOUS STATEMENT
Explanation: This statement is for the same record as an earlier statement in which an error was detected.
System action: Processing continues.
User response: Correct the erroneous statement and rerun.
EQQY011E INSERT OF APPLICATION
ADID
FAILED
Explanation: The program interface request to INSERT application
ADID
to the current plan failed.
System action: Processing continues.
Problem determination: The preceeding message gives the reason why the insert could not be done.
User response: Correct the error described by the previous message and rerun.
EQQY014W SUBSYS(NAME) AND CHECK(N) SPECIFICATIONS ARE MUTUALLY EXCLUSIVE. THE CHECK
REQUEST IS IGNORED
Explanation: The validation of the output data cannot be suppressed when the output data from the batch loader
goes to an TME 10 OPC subsystem.
System action: Processing continues. The normal data validation is applied.
User response: You can remove the CHECK keyword.
EQQY015W ACTION(SCAN) AND CHECK(Y) SPECIFICATIONS ARE MUTUALLY EXCLUSIVE. THE CHECK
REQUEST IS IGNORED
Explanation: No validation of output data is performed when ACTION(SCAN) is specified. By ACTION(SCAN), a
check is done (on the batch loader ststements) to verify that keywords are properly specifies, and the required values
are set as well. No output data is produced and no consistency checking is done.
System action: Processing continues. No data validation is done.
User response: You can remove the CHECK keyword.
EQQY020W CONFLICTING FORMAT SPECIFICATION BETWEEN
SUBS
AND THE
KW
KEYWORD FORMAT
FORM
IS USED
Explanation: The character format for the application ID and owner ID used in the TME 10 OPC subsystem is used
by the batch loader when the output is directed to a subsystem.
System action: Processing continues using the DBCS option
FORM
for the
KW
data.
User response: You can remove the KW keyword.
386 TME 10 OPC Messages and Codes