EQQZ092W EQQZ100E
EQQZ092W PERIODS ARE NOT PLACED CORRECTLY IN THE NOERROR VALUE,
VALUE
Explanation: A NOERROR statement, or the NOERROR keyword of JTOPTS, contains an error. Entry
VALUE
is
not valid. The periods in an entry must be separated by at least one and no more than eight non-blank characters.
System action: The normal mode manager (NMM) terminates.
System programmer response: Correct the entry and restart the NMM subtask or the TME 10 OPC address
space.
EQQZ093E FILE KEYWORD IS MISSING
Explanation: The current AUDIT statement does not contain the FILE keyword.
System action: The NMM terminates.
System programmer response: Add the FILE keyword to the current AUDIT statement, and restart the TME 10
OPC subsystem.
EQQZ094E A PARAMETER IS REQUIRED FOR THE FILE KEYWORD
Explanation: The FILE keyword in current AUDIT statement does not specify a value.
System action: The NMM terminates.
System programmer response: Add the FILE keyword to the current AUDIT statement, and restart the TME 10
OPC subsystem.
|EQQZ095I GENSERV :
status1
|CPLOCKS :
status2
|EVENTS :
status3
|WSATASK :
status4
|EVELIM VALUE :
val1
|STATIM VALUE :
val2
|Explanation: This message is issued after the /F
subsys
,DSPSTA command has been given. It indicates whether
|the keywords EVENTS, CPLOCKS, GENSERV, and WSATASK have been activated. (These are activated either by
|the STATIM initial parameter statement or by the appropriate modify command.) The message also displays the
|current value of the EVELIM and STATIM keywords. These values can be used to specify how often statistics
|messages are issued.
|The values of the message variables are:
|
status1
“Active” if GENSERV statistic messaging is currently active. Otherwise, “Inactive.”
|
status2
“Active” if CPLOCK statistic messaging is currently active. Otherwise, “Inactive.”
|
status3
“Active” if EVENTS statistic messaging is currently active. Otherwise, “Inactive.”
|
status4
“Active” if WSATASK statistic messaging is currently active. Otherwise, “Inactive.”
|
val1
The current value of the EVELIM parameter, which can be in the range 0–9999.
|
val2
The current value of the STATIM parameter, which can be in the range 0–99.
|System action: Processing continues.
|User response: None.
|System programmer response: None.
EQQZ100E THE GMTOFFSET VALUE IS REQUIRED AND MUST BE AN INTEGER.
Explanation: The GMTOFFSET keyword specifies an incorrect value. The value is required and it must be a positive
or negative integer.
System action: TME 10 OPC considers current initialization statement to be incorrectly coded. This will cause
TME 10 OPC initialization to fail.
System programmer response: Correct the GMTOFFSET value and restart TME 10 OPC.
418 TME 10 OPC Messages and Codes