EQQ0562E EQQ0589W
EQQ0562E INVALID COMBINATION OF INPUT PARAMETERS
Explanation: It is not possible to select input type 3 when report type 3 or 4 has been chosen.
System action: The job is terminated.
User response: Check the input parameters and then resubmit the job.
EQQ0563E INVALID NUMBER OF ITEMS IN INPUT PARAMETERS
Explanation: The number of items is greater than 12 or does not equal the number of items in the list.
System action: The job is terminated.
User response: Check the input parameters and then resubmit the job.
EQQ0564W RECORD IS BLANK OR APPLICATION ID DOES NOT START IN POSITION ONE
Explanation: A record in the user input dataset was found that was either blank or the application ID did not start in
position one.
System action: The record is ignored.
User response: Check the input dataset to determine if the application ID starts in position one or if the record is
blank.
EQQ0567W APPLICATION
ADID
HAS INVALID RULE
RULE
IN RUNCYCLE
Explanation: The internal representation of rule
RULE
in application
ADID
is invalid, and the corresponding rule
command cannot be derived from it.
System action: The job continues processing with the next run cycle, or application description.
User response: Check the rule definition in the AD dialog, and redefine it if necessary.
EQQ0585I NO CHANGES PERFORMED FOR THIS SELECTION
Explanation: The user has specified that a certain field should be changed by the mass update function but no field
in the application description database matched the specifications.
System action: The job continues processing. The application description database is not updated for this selection.
User response: Check the input specifications, correct any errors, and retry the mass update of this field.
EQQ0588E OCCURRENCE
OCCAD
OCCDAY
OCCTIME
HAS TOO MANY PREDECESSORS.
CURRENT PREDECESSOR APPLICATION IS
DEPAD
DEPDAY
DEPTIME
.
Explanation: An occurrence has been found which has too many predeccessors to be saved in the LTP dependency
work file defined by DD-statement EQQLDDS.
System action: The LTP batch job terminates processing. No new Long Term Plan is created.
User response: Verify that external predecessors have been correctly defined in the Application Description file for
this application. If necessary, reallocate the EQQLDDS and the EQQLTDS file to support a larger maximum record
size. After making corrections, resubmit the failing LTP batch job.
EQQ0589W ERROR DETECTED WHEN PROCESSING AN OPERATIONS NETWORK FOR OCCURRENCE
OCCID
Explanation: When building a network for operations within a single application, a loop or an inconsistency was
found. This message indicates that an error in the application description was introduced after the application
description was created.
System action: The job continues processing. No occurrences are generated for the application.
User response: Check the application description.
Chapter 34. EQQnnnn Messages 465