EQQ0319E EQQ0323W
EQQ0319E WRONG LTP DATA SET SELECTED AS INPUT
Explanation: The long-term plan dataset used as input when extending or re-planning the current plan period is not
the correct dataset. The dataset may have been restored from a backup copy.
System action: The daily planning program is terminated.
User response: Ensure the daily planning batch JCL is referring to the same current plan and long-term plan
datasets as the controller subsystem. If you have restored the long-term plan incorrectly, restore it from the
EQQLTBKP dataset.
Refer to
TME 10 OPC Customization and Tuning
for information about restoring TME 10 OPC datasets. Resubmit
the daily plan batch job when the error has been corrected.
EQQ0320E THE OPC STATUS RECORD CONTAINS INCORRECT VALUES
Explanation: The OPC status record (in the checkpoint dataset) does not contain the value that the Daily Plan
program expects when the backup completion signal is received. The dataset may have been restored from a backup
copy.
System action: The Daily Plan program is terminated.
User response: Resubmit the Daily Plan program.
EQQ0321W START DATE/TIME ENTERED IGNORED. CURRENT PLAN END DATE/TIME IS USED
Explanation: A start date and time was entered when running a trial extend of the current plan. The start date and
time is ignored and replaced by the current plan end date and time.
System action: The trial daily planning program continues processing.
User response: None.
EQQ0322E NO WS OPEN TIMES FOR PERIOD ******** **.** - ******** **.**
Explanation: All workstations are closed during the period
START
–
END
.
System action: The daily planning program is terminated.
User response: Use the workstation description dialog or the Calendar dialog to update the open intervals.
EQQ0323W WS ACTIVITY REPORT OPTION MUST BE 0 OR 1 - SET TO 1
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
The workstation activity report options are:
0For workstation activity report not required
1For workstation activity report required.
System action: The value is set to 1 and the daily planning program continues processing.
User response: Change the parameter value for the workstation activity report option to 0 or 1 in the SYSIN
statement for the daily planning program.
444 TME 10 OPC Messages and Codes