EQQJ511E EQQJ516E
EQQJ511E JOB
JOBNAME
IN APPLICATION
APPL
CONTAINS AN OPC/ESA CONTROL STATEMENT THAT IS
NOT RECOGNIZED
Explanation: OPC/ESA was unable to submit the job identified because it contains an incorrectly coded //*%OPC
statement and JCL variable scanning is active for this job.
System action: Status for current operation is set to ended-in-error with error code OJCV.
User response: Locate the JCL for this job and correct the //*%OPC statement. Use the OPC/ESA dialog to rerun
the operation.
EQQJ512E RECURSIVE DEPENDENCY VARIABLE
VAR
AT LINE
LINE
OF
SCTN
Explanation: A closed loop of dependency definitions exists.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Examine the table definitions of this variable and the chain on which it is dependent, and eliminate
the closed dependency loop. The loop does not necessarily include the variable listed in the message.
EQQJ513E SETUP VARIABLE
CHLD
DEPENDENT ON SUBMIT VARIABLE
PRNT
AT LINE
LINE
OF
SCTN
Explanation: A prompt variable cannot be dependent on a submit variable.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the table definitions, SEARCH directives, or TABLE directives.
EQQJ514E RETURN CODE
RC
FROM USER EXIT
USRX
. THE EXIT WAS DEFINED FOR VARIABLE
VAR
IN
TABLE
TAB
FOR APPLICATION
ADID
, WITH OCCURRENCE INPUT ARRIVAL
IAD
,
IAT
. THE
OPERATION NUMBER IS
OPNO
Explanation: TME 10 OPC received an unexpected return code from an exit.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the user module and supply a valid return code, and restart TME 10 OPC.
EQQJ515E RECOVERABLE ABEND IN USER EXIT
USRX
THAT WAS DEFINED FOR VARIABLE
VAR
IN TABLE
TAB
FOR APPLICATION
ADID
, INPUT ARRIVAL IS
IAD
,
IAT
, OPERATION NUMBER IS
OPNO
Explanation: The user module caused an abend from which TME 10 OPC recovered.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the user module, and restart TME 10 OPC.
EQQJ516E UNRECOVERABLE ABEND IN USER EXIT
USRX
THAT WAS DEFINED FOR VARIABLE
VAR
IN
TABLE
TAB
, APPLICATION IS
ADID
, WITH OCCURRENCE INPUT ARRIVAL
IAD
,
IAT
, OPERATION
NUMBER IS
OPNO
Explanation: The user module caused an abend from which TME 10 OPC could not recover.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the user module, and restart TME 10 OPC.
136 TME 10 OPC Messages and Codes