EQQA516E EQQA523E
EQQA516E NO RUN CYCLES FOR AN APPLICATION IN A GROUP
Explanation: An application that references a group definition for run cycle information cannot itself contain run
cycles.
System action: The request is rejected.
User response: None.
EQQA520E THE RULE ON WHICH THE RUN CYCLE IS BASED MUST BE DEFINED
Explanation: A rule-based run cycle (type R or E) was inserted or replicated in the run cycle table, but no rule
definition was specified.
System action: The request is rejected.
User response: Use the S row command to select the rule modification panel and define the rule.
EQQA521E A VALID RULE NAME MUST BE SPECIFIED
Explanation: You have not entered a valid rule name. A valid rule name is maximum 8 characters long, first
character alphabetical and the remaining characters alphanumeric, or national.
System action: The request is rejected.
User response: Specify a valid rule name.
EQQA522E THE RULE NAME MUST BE UNIQUE WITHIN AN AD
Explanation: You have specified a rule name that has already been defined for a rule-based run cycle for this AD.
System action: The request is rejected.
User response: Specify a unique rule name.
EQQA523E THE RUN CYCLE TYPE HAS BEEN INCORRECTLY MODIFIED
Explanation: You have modified the type from an offset-based run cycle to a rule-based run cycle, or vice versa.
You can only change type within the run cycle subtype; that is, N and X for offset-based run cycles, or R and E for
rule-based run cycles.
System action: The request is rejected.
User response: Specify one of the required types, or create a new run cycle.
30 TME 10 OPC Messages and Codes