EQQM266E EQQM313E
EQQM266E THERE IS NO ACTIVE WORKSTATION FOR THIS OPERATION
Explanation: The operation is scheduled on a workstation that is inactive. If alternate workstations are specified,
these are also inactive.
System action: The request is ignored.
User response: Issue the EXECUTE command when the workstation, or an alternate workstation, becomes active
again.
EQQM267E STATUS CANNOT BE CHANGED AS THE OPERATION HAS BEEN MANUALLY HELD
Explanation: You cannot request TME 10 OPC to set the next logical status for an operation that has been
manually held.
System action: The request is ignored.
User response: Either set a specific status using the N–x row command, or manually release the operation (MR)
and then reissue the N row command.
EQQM301I WORK STATION UPDATED IN CURRENT PLAN
Explanation: The workstation has been updated in the current plan.
System action: The modify workstation function is terminated.
User response: None.
EQQM302W A WORK STATION IS CURRENTLY BEING UPDATED, TRY LATER
Explanation: You have attempted to modify a workstation, but it is currently being updated by another user.
System action: The system waits for you to respond.
User response: Try again later.
EQQM303E THE REPORTING ATTRIBUTE SPECIFIED MUST BE A, S, C, OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM304E CONTROL ON SERVERS OR RESOURCES MUST BE Y-YES OR N-NO
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM310E OPEN TIME INTERVALS MUST NOT OVERLAP
Explanation: Data entry error; see “Data Entry Errors” on page 2.
It is not allowed to have overlapping open time intervals for the workstation.
EQQM311E INTERVAL START MUST PRECEDE END
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The open interval start time must be earlier than the open interval end time.
EQQM312E START TIME MUST BE SPECIFIED FOR AN INTERVAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM313E END TIME MUST BE SPECIFIED FOR AN INTERVAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
188 TME 10 OPC Messages and Codes