EQQM976W EQQM991E
occurrences, and then try to add the occurrence again. If your current plan regularly contains a large number of
occurrences, you should consider shortening the length of the Current Plan in future daily planning runs.
EQQM976W ONE OR MORE OF THE EXTERNAL DEPENDENCIES OF OPER

OPER

IN APPLICATION
ADID
WERE NOT RESOLVED WITHIN THE GROUP
Explanation: A dependency loops in an occurrence group has been detected and eliminated.
System action: At least one of the external dependencies for the operation has not been resolved within the group.
If there are other occurrences, external to the group, in the current plan that matches the operations dependency
definitions, the dependencies have been resolved to those occurrences. Message EQQM358W is issued to the dialog
user.
User response: Check how the dependencies have been resolved and modify if appropriate. The application
descriptions for this group should also be modified in order to avoid this situation.
EQQM990E MCP UPDATE FAILED. FAILING MTD BELOW:

MTD

Explanation: A modify-current-plan request failed because of an error.
The request is given in hexadecimal form. Use HEX ON when browsing the TME 10 OPC message log.
System action: The request is rejected, and message EQQM027E is issued to the dialog user.
System programmer response: If the error occurs again, investigate the failing occurrence to see if any abnormal
activities have been associated with it. Then report the error to your IBM representative.
EQQM991E ERROR DURING MCP UPDATE. FAILING MODULE:
MODULE
Explanation: A modify current plan request failed. If message EQQM027E is issued to the dialog user, EQQM991 is
followed by the another message which describes the actual error message reported by the modify current plan
module

MODULE

. If message EQQM028I is issued to the dialog user, no additional message appears.
System action: The request is rejected and either message EQQM027E or EQQM028I is issued to the dialog user.
System programmer response: If you report the error message following this message to your IBM representative.
The information in this message is also required by IBM to diagnose the error.
212 TME 10 OPC Messages and Codes