EQQ0196E EQQ0303E
EQQ0196E ERRORS ENCOUNTERED WHILE SORTING
Explanation: Errors were encountered from the sort program.
System action: The job is terminated.
User response: Contact your system programmer.
System programmer response: Check the sort program messages to determine the cause of the error. Correct the
errors and then resubmit the job.
EQQ0300E LTP DATA SET IN USE - TRY LATER
Explanation: The long-term plan dataset is being used by another TME 10 OPC function.
System action: The job is terminated.
User response: Try again later.
EQQ0301E PERIOD START
SDATE
STIME
>= PERIOD END
EDATE
ETIME
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The end of the planning period must be later than the start of the period.
System action: The daily planning program is terminated.
User response: Correct the error and resubmit the job, or submit the job using the TME 10 OPC dialog.
EQQ0302E PERIOD
SDATE
STIME
-
EDATE
ETIME
OUTSIDE LONG TERM PLAN
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The planning period
SDATE
STIME
-
EDATE
ETIME
is outside the current range of the
long-term plan.
System action: The daily planning program is terminated.
User response: Correct the error and resubmit the job, or submit the job using the TME 10 OPC dialog.
EQQ0303E SPECIFIED PARAMETER FIELD TOO SHORT
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The parameter field is shorter than the required length.
System action: The job is terminated.
User response: Correct the error and resubmit the job, or submit the job using the TME 10 OPC dialog.
440 TME 10 OPC Messages and Codes