EQQIC37E EQQIC38W
|EQQIC37E CURRENT PLAN RECORD OF TYPE
RECID
FOR APPLICATION
AD
WITH INPUT ARRIVAL
IA
IS
|NOT VALID, TOO HIGH OCCURRENCE NUMBER, CANNOT BE CONVERTED
|Explanation: The occurrence number in one of the records in the input file is higher than the range supported by the
|TME 10 OPC release you are migrating to. RECID is the current plan record type:
|03 An operation record
|09 A rerun record
|13 A catalog management record
|14 A joblog record
|System action: The migration fails without producing a migrated current plan file.
|User response: Perform daily planning to reduce the number of occurrences in the current plan being migrated.
|The BATCHOPT parameter PREVRES should be set to NO at the replan. If the current plan still has too many
|occurrences, do one of the following:
|Run TME 10 OPC until enough occurrences have been completed.
|Delete occurrences, using the OPC dialog or the program interface.
|Then repeat the plan.
|System programmer response: None.
|EQQIC38W
RECTYP
RECORD FOR OCCURRENCE
AD AI
, OPERATION
OPNUM
IS TOO LARGE TO BE
|WRITTEN TO THE OUTPUT FILE
|Explanation: A record in the input JS file defined to the migration program is too large to be written to the otput file.
|This is most likely because the maximun record size is larger for the input JS file than for the output JS file.
|System action: The record that is too large is ignored. The migration program continues to process normally. The
|return code for the current CONVERT run will be at least 4.
|System programmer response: Determine whether the maximum record size defined for the JS file is too small.
|Then reallocate the file and rerun the migration job.
Chapter 12. EQQICnn Messages 129