EQQD107E EQQD112I
EQQD107E OPC/ESA IS NOT AUTHORIZED TO DELETE DATASET
DSNAME
IN CATALOG
CAT
.
Explanation: An attempt was made to scratch this dataset, but OPC/ESA is not authorized to do so.
System action: OPC/ESA will set error status for the catalog management action of this dataset. Also, the catalog
management status for this operation will be set to error.
User response: Contact your systems programmer.
System programmer response: If OPC/ESA should be authorized to delete the dataset, contact your security
administrator.
EQQD108E OPC/ESA WAS UNABLE TO COLLECT CATALOG MANAGEMENT INFORMATION FOR JOB
JNM
,
JOB ID
JOBID
. RETURN CODE IS
RC
, REASON CODE IS
RSN
.
Explanation: An error occurred when OPC/ESA tried to collect information about datasets created in this operation.
System action: This information is passed to the controller, and the catalog management status for the operation will
be set to N (cancelled).
User response: Contact your systems programmer.
System programmer response: The problem may be related to I/O errors on a catalog. If this is not the case,
please contact your IBM representative.
EQQD109E CATALOG MANAGEMENT INITIALIZATION FAILED. THE REASON IS THAT THERE IS NO
CONNECTION ESTABLISHED FOR TRANSFERRING DATASET INFORMATION TO THE
CONTROLLER.
Explanation: The catalog management task could not start, as it did not find a connection between this tracker and
the controller.
Problem determination: Check the OPC/ESA parmlib members involved.
User response: Contact your system programmer.
System programmer response: Make sure this tracker is connected to the controller by either NCF or XCF, and
that the connection has been established.
EQQD110I DATASET
DSN
WAS UNCATALOGED. THE DATASET RESIDES ON VOLUME
VOL
. APPLICATION IS
AD
, INPUT ARRIVAL IS
IA
, OPERATION NUMBER IS
OPNO
, AND JOBNAME IS
JNM
.
Explanation: Catalog management has uncataloged this dataset. The dataset still exists, and resides on the volume
indicated in the message.
System action: Normal processing continues.
User response: None.
EQQD111I DATASET
DSN
WAS UNCATALOGED. APPLICATION IS
AD
, INPUT ARRIVAL IS
IA
, OPERATION
NUMBER IS
OPNO
, AND JOBNAME IS
JNM
. THE DATASET RESIDES ON THE FOLLOWING
VOLUMES
Explanation: Catalog management uncataloged this dataset. The dataset still exists, and resides on the volumes
indicated by EQQD112I messages.
System action: Normal processing continues.
User response: None.
EQQD112I VOLSER
VOL
.
Explanation: This list of volume numbers always follows message EQQD111I, and identifies a volume serial
number. This message is repeated for each volume that the uncataloged dataset resides on.
System action: Normal processing continues.
User response: None.
68 TME 10 OPC Messages and Codes