EQQM250E EQQM257I
EQQM250E CURRENT OPERATION STATUS MUST BE A, *, R, W, C, OR E TO BE HELD
Explanation: Only operations in status A, W, R, *, C, or E can be manually held.
System action: The request is ignored.
User response: None.
EQQM251I OPERATION IS ALREADY MANUALLY HELD BY DIALOG
Explanation: The operation has already been set to MANUAL HOLD by an TME 10 OPC dialog user.
System action: The request is ignored.
User response: None.
EQQM252I OPERATION IS NOT MANUALLY HELD BY DIALOG
Explanation: The operation for which the MANUAL RELEASE command was issued, is not Manually HELD by an
TME 10 OPC dialog user request.
System action: The request is ignored.
User response: None.
EQQM253I OPERATION IS PUT IN MANUAL HOLD
Explanation: The operation for which the manual HOLD command was issued is now recognized to be HELD by
TME 10 OPC.
System action: The operation is manually HELD.
User response: None.
EQQM254I OPERATION HAS BEEN MANUALLY RELEASED FROM MANUAL HOLD
Explanation: A previously held operation has been release from hold at an TME 10 OPC dialog user's request.
System action: The operation is released, and may be scheduled by TME 10 OPC.
User response: None.
EQQM255E CURRENT OPERATION STATUS MUST BE A, *, W, C, OR R TO BE NOPED
Explanation: Only operations in status A, W, R, C, or &asteriak. can be no-oped.
System action: The request is ignored.
User response: None.
EQQM256I OPERATION IS ALREADY NOPED BY USER REQUEST
Explanation: The operation for which the NOP command was issued has already been NOPed by a dialog request.
System action: The request is ignored.
User response: None.
EQQM257I OPERATION IS NOT NOPED
Explanation: The operation for which the UN-NOP command was issued, is not currently NOP.
System action: The request is ignored.
User response: None.
186 TME 10 OPC Messages and Codes