EQQX605E EQQX612E
EQQX605E SELECT ONE AND ONLY ONE OF THE LU NAME LINES
Explanation: Only one of the entries in the subsystem name table can be selected by a / in the first column.
System action: The system waits for you to respond.
User response: If you are logged on to TSO on the MVS where the TME 10 OPC Controller is running, select the
row with the Controller subsystem name and no Server LU name. If you are logged on to TSO on another MVS,
select a row with a LU name specified, thereby selecting the proper Controller subsystem and the LU name of the
Server handling the communication to the Controller.
EQQX606E EACH ROW MUST HAVE A DIFFERENT SUBSYSTEM NAME/LU NAME COMBINATION
Explanation: The subsystem name table must have unique rows.
System action: The system waits for you to respond.
User response: Remove one of the rows with same values on both Controller subsystem name and Server LU
name.
EQQX610E
VERB
IN STATE
STATE
FAILED, RC
RC
, SR
SR
, DR
DR
Explanation: An APPC/MVS service request issued for Server communication failed. The verb
VERB
was issued
when the conversation was in state
STATE
. APPC/MVS returned: Return_Code
RC
, Status_Received
SR
and
Data_Received
DR
.
System action: The request is rejected.
User response: Check that the proper LU name is specified. For the dialog the LU name is set via the OPTIONS
menu. A program interface application sets the LU name through the EQQYPARM parameter file or through the INIT
request. Repeat the dialog action from the TME 10 OPC primary option panel, or rerun the program interface
application.
System programmer response: Check the meaning of the APPC/MVS return codes. Check the message log of the
Server for a message explaining the communication loss. If the problem reoccurs, report the error to your IBM
representative.
EQQX611E APPC/MVS VERB
VERB
FAILED RC
RC
, SR
SR
, DR
DR
Explanation: An APPC/MVS service request issued for Server communication failed. The verb
VERB
was issued
when the conversation was in state
STATE
. APPC/MVS returned: Return_Code
RC
, Status_Received
SR
and
Data_Received
DR
.
System action: The request is rejected.
User response: Check that the proper LU name is specified. For the dialog the LU name is set via the OPTIONS
menu. A program interface application sets the LU name through the EQQYPARM parameter file or through the INIT
request. Repeat the dialog action from the TME 10 OPC primary option panel, or rerun the program interface
application.
System programmer response: Check the meaning of the APPC/MVS return codes. Check the message log of the
Server for a message explaining the communication loss. If the problem reoccurs, report the error to your IBM
representative.
EQQX612E INSUFFICIENT VIRTUAL STORAGE, DIAGNOSTIC INFO
ALT
Explanation: A routine for communication with the Server failed because it could not obtain sufficient amount of
virtual storage.
System action: The request is rejected.
User response: Logon to TSO with a larger SIZE parameter value, or rerun the program interface application with a
larger Region specified.
382 TME 10 OPC Messages and Codes