EQQD120I EQQD126I
EQQD120I OPC HAS PROCESSED KEYWORD CATACT IN THE OPCOPTS STATEMENT. THE KEYWORD IS
IGNORED, BECAUSE
OPC
HAS BEEN DEFINED AS A TRACKER SYSTEM.
Explanation: The CATACT keyword is a controller keyword. When you define it for a tracker system it is ignored.
System action: The keyword is ignored.
System programmer response: If you do not want this message to be issued, remove the keyword from the
OPCOPTS statement and restart the system.
EQQD121W OPC/ESA WILL NOT TRY TO PERFORM ANY AUTOMATIC RECOVERY ACTION FOR
APPLICATION
AD
, WITH INPUT ARRIVAL
IA
, OPERATION NUMBER
OPNO
.
Explanation: The catalog management for this operation was unsuccessful. Therefore OPC/ESA will not
automatically initiate auto recovery for this operation.
System action: No automatic recovery attempt is done for the operation.
User response: The automatic recovery for this operation has to be manually initiated from the MCP dialog.
System programmer response: None.
EQQD123I NO CATALOG MANAGEMENT ACTIONS HAVE BEEN TAKEN FOR OPERATION
OPNO
IN
APPLICATION
AD
BECAUSE THE PRE-CATALOG-MANAGEMENT EXIT HAS DISCARDED THE
PROCESSING. EXIT NAME IS
XIT
.
Explanation: The pre-catalog-management exit has suppressed catalog management for all datasets in this
operation.
System action: Normal processing continues.
User response: None.
EQQD124E OPC/ESA COULD NOT PROCESS DATASET
DSN
. CATALOG NAME IS
CAT
. REASON FOLLOWS
Explanation: OPC/ESA tried to locate and process a dataset in the catalog indicated in the message, but failed to
perform the actions against the dataset. The reason is described in message EQQD125 that follows this message.
System action: The catalog management status for the dataset is set to error.
User response: Contact your system programmer.
System programmer response: Check message EQQD125.
EQQD125I
CMTXT
Explanation: This message describes why TME 10 OPC could not process the dataset that was identified in
message EQQD124. It contains messages issued by other MVS products that were used by TME 10 OPC to process
the dataset.
System action: The catalog management status for the operation is set to error.
User response: Contact your system programmer.
System programmer response: Review any messages issued by the non-TME 10 OPC products and take the
action described in the documentation for each product concerned.
EQQD126I OPC HAS
ACT
DATASET
DSN
IN CATALOG
CAT
. JOBNAME IS
JNM
, JOB ID IS
JID
.
Explanation: OPC/ESA has performed the action described in the message for this dataset. The catalog name in
the message is the catalog that OPC/ESA has updated. The catalog name is only printed when a JOBCAT or
STEPCAT was specified in the JCL, otherwise the catalog name contains ********.
System action: Normal processing continues.
User response: None.
70 TME 10 OPC Messages and Codes