EQQJ612E EQQJ617E
EQQJ612E THE JCL IMBED EXIT
USRX
COULD NOT FIND JOB
MEMBER
IN ANY INPUT DATA SET
Explanation: The exit gave a return code indicating that the JCL could not be found in the exit’s input datasets.
System action: The current operation status is set to ended-in-error, with error code OJCV.
Problem determination: Check that all DD statements needed by the exit have been correctly defined.
System programmer response: Correct all errors and then restart TME 10 OPC.
EQQJ613E THE JCL IMBED EXIT
USRX
DID NOT RETURN ANY DATA FOR JOB
MEMBER
IN APPLICATION
APPL
Explanation: The exit was called to return JCL to TME 10 OPC, but no data was returned.
System action: The current operation status is set to ended-in-error, with error code OJCV.
Problem determination: Check that the exit works properly and is correctly installed.
System programmer response: Correct all errors and then restart TME 10 OPC.
EQQJ614E THE AMOUNT OF DATA RETURNED BY THE JCL IMBED EXIT
USRX
FOR JOB
MEMBER
IN
APPLICATION
APPL
EXCEEDS THE MAXIMUM AMOUNT SUPPORTED
Explanation: The exit was called to return JCL to TME 10 OPC, but more than 256KB (kilobytes) of data was
returned.
System action: The current operation status is set to ended-in-error, with error code OJCV.
Problem determination: Check that the exit is correctly installed, and that it works properly.
System programmer response: Correct all errors and then restart TME 10 OPC.
EQQJ615E THE JCL IMBED EXIT
USRX
COULD NOT BE LOADED. THE EXIT WILL BE FLAGGED AS NOT
USABLE
Explanation: TME 10 OPC was unable to load the exit. TME 10 OPC will not try to call it again. The exit will be
flagged as not executable.
System action: The current operation status is set to ended-in-error, with error code OJCV.
Problem determination: Check the JCL FETCH directive referring to the exit, and make sure the exit is in the
current load libraries in the started task JCL for TME 10 OPC.
System programmer response: Correct all errors and restart TME 10 OPC.
EQQJ616E THE JCL IMBED EXIT
USRX
HAS ABENDED WHILE PROCESSING JOB
MEMBER
IN APPLICATION
APPL
. SEE THE SYSUDUMP DATA SET FOR MORE INFORMATION. THE EXIT WILL BE FLAGGED
AS NOT USABLE
Explanation: The exit abended while processing. TME 10 OPC will not try to call it again. The exit will be flagged
as not executable.
System action: The current operation status is set to ended-in-error, with error code OJCV.
System programmer response: Correct all errors in the exit and restart TME 10 OPC.
EQQJ617E JOB
MEMBER
IN APPLICATION
APPL
REFERS TO AN UNUSABLE JCL IMBED EXIT,
USRX
. NO
DATA CAN BE RETRIEVED USING THIS EXIT
Explanation: TME 10 OPC has previously discovered an abend in this exit and marked it as not executable. This
exit will not be called again.
System action: The current operation status is set to ended-in-error, with error code OJCV.
System programmer response: Correct the exit, and restart TME 10 OPC to use the exit again.
150 TME 10 OPC Messages and Codes