EQQZ208I EQQZ210I
|EQQZ208I
OPC DATASET NAME
LAST-RC=
LAST RETURN CODE
|Explanation: Provides the return code of the last I/O operation on the specified DDNAME.
|
OPC DATASET NAME
The DD name of an OPC dataset
|
LAST RETURN CODE
One of the following values:
| NORMAL
| WARNING
| SEVERE
| CRITICAL
| UNKNOWN
|System action: Depending on the return code value and on the DDNAME specified, OPC could stop some of its
|subtasks.
|TME 10 OPC administrator response: If the
last-rc
value is other than NORMAL or WARNING, and depending on
|the DDNAME value, some of the OPC functions could not work properly. In this case, check the status of the physical
|sequential or VSAM dataset associated with DDNAME.
|EQQZ209I
NUMBER OF OPERATIONS
OPERATION DESCRIPTION
FOR TRACKER
TRACKER NAME
|Explanation: Displays the number of operations that have been completed or ended in error for the specified tracker.
|
NUMBER OF OPERATIONS
The number of operations completed or ended in error.
|
OPERATION DESCRIPTION
One of the following values:
|COMPLETED_OPERATIONS The number of operations that completed
|successfully on that destination
|IN_ERROR_OPERATIONS The number of operations that ended in error on
|the specified tracker.
|
TRACKER NAME
The name of the tracker.
|System action: If the OPC instrumentation for GEM is active, this message is translated into a Monitor Threshold
|event and sent to GEM, which updates the Job Scheduling view properly in the APM console.
|TME 10 OPC administrator response: OPC Administrator response: None.
|EQQZ210I
SUBSYSTEM NAME
EQQEVDS
ERROR CODE
ERROR :
ERROR MESSAGE
|Explanation: An error occurred on the Event dataset.
|
SUBSYSTEM NAME
The name of the OPC subsystem
|
ERROR CODE
Either SEVERE or FATAL
|
ERROR MESSAGE
Explains the cause of the error as being “I/O error” or “unable to open the file”
|System action: Depending on the error code value, some of the OPC functions could not work properly.
|TME 10 OPC administrator response: Check the status of the EQQEVDS dataset.
Chapter 33. EQQZnnn Messages 435