EQQF009I EQQF012I
EQQF009I ADAPTIVE PACING ON EVENT INFLOW
MODE
Explanation: The
MODE
can be ACTIVATED or DEACTIVATED.
ACTIVATED The data router has detected that the maximum number of queue elements on the event manager
queue (MGRQ) were already in use when the data router task attempted to add incoming events to
the MGRQ. The data router task has posted each locally attached event reader task and event
writer task (when EWSEQNO(
n
)), to stop reading from the event datasets or adding to the DRTQ.
The data router task has also built and sent a DQE request (type RTQ) to each remote (NCF or
XCF) linked tracker, where the remote data router task will post each attached event reader task and
event writer task (when EWSEQNO(
n
)), to stop reading from the event datasets or adding to the
DRTQ.
DEACTIVATED The data router task has detected that the event manager has processed all events on the event
manager queue (MGRQ), so the data router task has posted each locally attached event reader task
and event writer task (when EWSEQNO(
n
)), to start reading from the event datasets or dding to the
DRTQ. The data router task has also built and sent a DQE request (type RTQ) to each remote
(NCF and/or XCF) linked tracker, where the remote data router task will post each attached event
reader task and event writer task (when EWSEQNO(
n
)), to start reading from the event datasets or
adding to the DRTQ.
System action: TME 10 OPC processing continues.
User response: None, this message is for information only.
EQQF010I INVALID RETURN CODE
RETC
FROM EQQUX009 IS IGNORED
Explanation: User exit EQQUX009 passed an invalid return code back to the Data Router task. The return code is
ignored.
System action: Normal processing will continue. The return code is treated as return code 0.
User response: Inform your systems programmer.
System programmer response: Investigate why EQQUX009 returned an invalid return code.
EQQF011E THE OPERATION INITIALIZATION EXIT
USRX
HAS ABENDED WHILE PROCESSING OPERATION
OPN
IN APPLICATION
APPL
WITH IA
IA
SCHEDULED ON WORKSTATION
WSNAME
. THE EXIT IS
MARKED AS NOT USABLE.
Explanation: The exit abended while processing. TME 10 OPC will not try to call it again unless the Data Router
task is restarted. The exit will be flagged as not executable.
System action: The current operation status is set according to what is specified in the SUBFAILACTION JTOPTS
parameter.
System programmer response: Correct all errors in the exit and restart the Data Router task.
EQQF012I PROCESSING RETURN CODE
RETC
FROM EQQUX009
Explanation: User exit EQQUX009 passed a return code,
RETC
, that is not 0. The Data Router task processes the
return codes and continues normal processing.
System action: The return code is processed as follows:
4The current operation status will be set according to the specification in the SUBFAILACTION keyword in the
JTOPTS initialization statement.
8The operation status will be set according to the specification in the SUBFAILACTION keyword in the JTOPTS
initialization statement. All workstations specifying the destination will be set to offline status.
User response: Inform your systems programmer.
System programmer response: Investigate why EQQUX009 returned the return code.
Chapter 9. EQQFnnn Messages 103