EQQH308W EQQH502E
EQQH308W DUPLICATE VALUE(S)

H30801

IGNORED.
Explanation: You have specified duplicate values. Only one of the values will be used.
System action: Duplicate value removed.
User response: Check the specified values, and correct them if necessary.
EQQH309E THE SAVED RULE VALUE HAS BEEN DESTROYED, PLEASE REENTER THE INFO
Explanation: The rule value saved on the AD data base is not valid can not be used.
System action: The rule is invalid and must be reentered before use.
User response: Reenter the rule and rerun.
Problem determination: The diagnostic file of the TME 10 OPC subsystem (ddname EQQDUMP) contains a dump
of the rule value.
EQQH310E UNEXPECTED ERROR IN THE CALENDAR ROUTINE
Explanation: The calendar routine used in the rule interpretation or date generation has returned an unexpected
reason code.
System action: Processing of this specific rule cannot continue.
Problem determination: The diagnostic file of the TME 10 OPC subsystem (ddname EQQDUMP) contains a dump
of the control blocks.
User response: This is likely to be an internal error. If possible, rerun the request.
System programmer response: If you cannot find a valid reason for the error, save the diagnostic file and the
message log and contact your IBM representative.
EQQH401I NO DATE GENERATED BY THIS RULE
Explanation: No date generated by this rule.
System action: No dates generated.
User response: Inspect the rule and the validity period.
EQQH402W THE PERIOD

H40201

HAS NO ORIGIN WITHIN RULE VALIDITY.
Explanation: Period

H40201

has no origin within rule validity period.
System action: No dates generated.
User response: Correct the period specification or validity period and rerun.
EQQH501E NUMERIC FACTOR

H50101

EXCEEDS CYCLE

H50102

LENGTH
Explanation: Numeric factor out of range.
System action: The rule is invalid and will not be saved.
User response: Correct the numeric factor or cycle specification and rerun.
EQQH502E NUMERIC FACTOR

H50201

TOGETHER WITH WEEKDAY EXCEEDS CYCLE

H50202

LENGTH
Explanation: Numeric factor combined with a week day exceeds the period length. Note that name of a predefined
cycle is preceded by two unprintable characters.
System action: The rule is invalid and will not be saved.
User response: Correct the numeric factor or cycle specification and rerun.
Chapter 11. EQQHnnn Messages 115