EQQWL10W EQQWL15I
Chapter 29. EQQWLnn Messages
EQQWL10W WORK STATION
WSID
, HAS BEEN SET TO
STAT
STATUS
Explanation: The status of a workstation has changed. An authorized user may have changed the status. This
message may also be caused by a system failure or by a workstation becoming available again.
System action: The status of the workstation is changed. This may effect the ongoing work.
User response: If you do not want the workstation to have this status, change the status through the TME 10 OPC
dialog.
EQQWL11I ACTIONS ARE:
FAILACT
,
RERACT
,
STARTACT
Explanation: The previous message, EQQWL12I, identifies which workstation has a new status. This message
documents the actions defined for the workstation.
FAILACT
Represents the restart policy for started operations at this workstation, specified in installation
parameters or by a manual request to vary the workstation status.
RERACT
Represents the reroute actions for ready operations (status A, R, or *) from this point on.
STARTACT
Represents the actions that will be taken when the workstation is made available again, either
automatically or by a manual activate request.
System action: The actions described in this message are performed for operations on the workstation identified in
message EQQWL12I.
User response: If you want different actions, use the MCP dialog to change them.
EQQWL12I WORK STATION
WSID
IS MANUALLY VARIED TO
STATUS
STATUS
Explanation: A user has changed the status of a workstation, using the TME 10 OPC dialog. This message is
followed by EQQWL11, which indicates the restart, reroute, and start actions.
System action: The status of the workstation is changed. If the status is changed to failed or offline, a restart or
reroute action may be performed.
User response: Verify that you want the workstation to have this status.
EQQWL13I REROUTING IN EFFECT FOR WORK STATION
WSID
Explanation: The workstation indicated in the message is unavailable to receive work. TME 10 OPC will route work
scheduled for this workstation to another workstation.
System action: Operations will not be started on this workstation.
User response: Verify that the workstation should be unavailable.
EQQWL15I REROUTING IS WITHDRAWN
Explanation: Previously, work scheduled for this workstation was routed to another workstation. Now, this
workstation is available again.
This message may follow message EQQWL10W or EQQWL12I.
System action: Work will now be scheduled on this workstation.
User response: None.
Copyright IBM Corp. 1991, 1998 291