Oregon Scientific SE300 manual Viewing Data While Stopwatch / LAP is Running, Task Instruction

EN

To get the most out of your stopwatch functions complete your user and exercise profile. If you have not completed the user profile you will be unable to use the calorie and % fat burned function.

•Press MODE to enter CHRONO Mode. You can now perform the following functions:

TASK	INSTRUCTION
Start stopwatch	Press ST / SP / +.
Pause / resume	Press ST / SP / +.
stopwatch
Reset	Press and hold SET.
Save lap		Press LAP / MEM / - while the
		stopwatch is running.
		NOTE		Up to 60 laps or 99 hrs:59 mins
		total can be stored in the memory.
Select exercise		1. Press and hold SET.
profile for		2. Press ST / SP / + or LAP / MEM
stopwatch
		/ - to select 1 of the 3 exercise
		profiles. Press SET to confirm.
Turning on / off		After selecting exercise profile, the
auto lap		setting AUTO-LAP on/off will appear.
		Press ST / SP / + or LAP / MEM / - to
		select. Press SET to confirm.
		If AUTO-LAP is on, a lap will be taken
		automatically once you have traveled
		a pre-set distance (e.g. 1.0km).
		NOTE	If auto-lap function (by distance)
		is selected, stopwatch will be paused if
		speed is zero.

NOTE The stopwatch begins measurement in min:sec:1/100 sec. After 59 minutes pass, the display will change to hrs:min:sec.

VIEWING DATA WHILE STOPWATCH / LAP IS RUNNING

While the stopwatch or lap functions are being used, press SET to view and toggle between the following screen displays:

•Total time / split time and current heart rate

•Lap time and current heart rate

26