![](/images/new-backgrounds/1180020/180020267x1.webp)
DM1000 Operating Guide
Replacing the
Wiper Blade
Assembly
When you replace the printhead, you must also replace the wiper blade assembly.
How To Replace the Wiper Assembly
1.Press the Menu Key.
2.Select Maintenance.
3.Select Replace Wiper Blade Assembly.
4.Lift up the main cover.
5.Locate the wiper blade assembly in
9
front of the printhead assembly. | Wiper Blade Assembly |
6.Locate the small black lever behind and next to the wiper assembly.
7.Push the lever to the rear to release the wiper. Slide the assembly to the left and lift it out.
8.Remove new wiper blade assembly from package.
9. Replace the wiper blade by placing Push Lever to Rear To Release it directly into the wiper blade slot
with the shaft end to the right. Slide the wiper blade to the right until it clicks in place.
10.Close the main cover.
Slide Assembly To the Left
and Lift Out
SV60951 Rev. A | |
|