![](/images/new-backgrounds/1180020/180020263x1.webp)
Changing the Printhead
DM1000 Operating Guide
When you change the printhead, you also need to replace the wiper blade |
|
assembly. Follow the instructions for both procedures. | 9 |
IMPORTANT! Make sure you have a replacement printhead before you |
begin this procedure. You cannot cancel this process once you begin.
How To Change the Printhead
1.Press the Menu key.
2.Select Maintenance.
3.Select Replace Printhead.
4.Lift the main cover.
5.Slide printhead latch to the left and pull forward as seen in
(1) in picture below.
6.Hold the latch in place and pull front panel forward as seen in (2) in the picture above.
7.Lift printhead cover toward the rear.
8.Holding printhead handle, lift printhead straight up so that back of the printhead does not rub against the pins (connectors) in the rear of the casing.
SV60951 Rev. A | |
|