Siemens 611-D, 840C

12 Functional Descriptions 08.96

12.25.4 Memory configuration on control power-up

The user can now configure the NC memory according to his requirements by following the

procedure described below:

Select softkey "File functions" to call display 1:

Fig. 1

Machine Parameter Program. Services Diagnosis

04:45

Start-up/Machine data/Standard data

Edit Preset

Name Type

TEA1<online>

NCMEMCFG

Type Length Date

TEA1

Start-up/Machine data/Standard data

Name

Select softkey "Preset" to copy file NCMEMCFG over into the user data area (file name

remains unchanged!).

By selecting softkey "Edit", you can now call the NCMEMCFG file in the user area in order to

edit it and to change the configuration values according to your requirements. Changes may

only be made in General reset mode. By selecting the edit function, you call displays 2, 3

and 4.

The MDD performs a plausibility check on the entered data. If a value which is lower/higher

than the minimum/maximum permissible limit is entered, the error message "Values only

from ... to ..." is output.

12–262

SINUMERIK 840C (IA)