Siemens 611-D, 840C 5.5 Cycles machine data (as from SW 3)

09.95

SINUMERIK 840C (IA)

5.5 Cycles machine data (as from SW 3)

Selection Diagnosis

Machine

data

Start-up

Cycles MD

Press the Diagnosis, Start-up, Machine data and Cycle MD softkeys to call up the

cycles machine data display.

Fig. 5.8

Explanation Measuring cycles and machining cycles are available for standard machining

routines that are repeated several times. The cycles can be assigned the

required machine data via the Cycles MD softkey. In this area you will find

central and channel-dependent cycle machine data. The Central cycles MD are

divided up into memory groups for measuring elements, measuring element data,

control bit, user data and user bits. The Channel-dependent cycles MD are

divided into values for measuring cycles, control bits for measuring cycles, user

data and user bits.

Note The functions of the individual machine data are described in the Installation

Guide, User Guide and Programming Guide for cycles.

5 Machine Data Dialog (MDD – as from SW 3)

5.5 Cycles machine data (as from SW 3)