Siemens 611-D, 840C 6 NC Machine Data (NC MD) NC Setting Data (NC SD)

12.93 6 NC Machine Data (NC MD), NC Setting Data (NC SD)
6.1 NC machine data (NC MD)
6 NC Machine Data (NC MD)
NC Setting Data (NC SD)
6.1 NC machine data (NC MD)
6.1.1 Entering NC machine data
NC machine data are used to adapt the NC to the machine tool. It is up to the person installing
to ascertain and optimize all items of machine data not preset by the manufacturer or end
user.
Selection: Data area (up to SW 2)
Diagnosis
NC
diagnosis
NC
start-up
1)
NC
MD PLC MD Cycles MD Enter password Lock password Overall reset mode
General
data Channel data Axial Data 1Axial Data 2Spindle data Channel memory Bits
General
bits Channel bits 1 Channel bits 2 Axial bits 1 Axial bits 2 Spindle bits Compensa- tion flags
A password must be entered before machine data can be modified.
_______
1) Start-up can be locked out with the keyswitch when bit 5 of NC MD 5006 is "1".
© Siemens AG 1992 All Rights Reserved 6FC5197- AA50 6–1
SINUMERIK 840C (IA)