Siemens 611-D, 840C 4.8 Functions up to SW 2 4.8.1 NC data management (up to SW 2)

09.95
 Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
4–56
SINUMERIK 840C (IA)
4.8 Functions up to SW 2
4.8.1 NC data management (up to SW 2)
As from SW 3 NC data management has been moved to
the Services area. Please refer to the Operator’s Guide for
more detailed information. The description below applies to
SW 1 and SW 2.
In the area DIAGNOSIS/NC DATA management, data for the NCK can be saved
to hard disk or loaded from the hard disk into the NCK memory. It is also possible
to edit them in the ASCII editor.
SNC machine data (TEA1)
SCycle machine data (TEA4)
SSetting data (SEA)
SCycle setting data (SEA4)
SR parameters (RPA)
SZero offsets (ZOA)
STool offsets (TOA)
The correct sequence of operation is described in the Operator’s Guide up to
SW2
SSelecting NC data
Diagnosis
NC data
management
To obtain the basic display for NC data, press the softkeys DIAGNOSIS,
START-UP then NC DATA MANAGEMENT.
4 MMC Area Diagnosis
4.8 Functions up to SW 2