12 Functional Descriptions 06.93
12.1.2 Functional description
6000
Comp. point 4
Yes/No +/-Comp. point 3
Yes/No +/-Comp. point 2
Yes/No +/-Comp. point 1
Yes/No +/-
Comp. point 5
Yes/No +/-
Comp. point 8
Yes/No +/-
Comp. point 12
Yes/No +/-
Comp. point 996
Yes/No +/-
Comp. point 1000
Yes/No +/-
Comp. point 7
Yes/No +/-
Comp. point 11
Yes/No +/-
Comp. point 6
Yes/No +/-
Comp. point 10
Yes/No +/-
Comp. point 995
Yes/No +/-
Comp. point 999
Yes/No +/-
Comp. point 994
Yes/No +/-
Comp. point 998
Yes/No +/-
Comp. point 993
Yes/No +/-
Comp. point 997
Yes/No +/-
6001
6002
6248
6249
Comp. point 9
Yes/No +/-
76543210
Bit No.
MD No.
- = 0
+=1
No = 0
Yes = 1
Since 4 compensation points are available for each machine data, it is specified in the control
that only the point on the far righthand side (bits 0, 1) can be defined as the reference point.
Example
• Reference point is to lie on compensation point 793
793 – 1
MD offset = ––––––––––= 198
4
• MD offset 198 = MD 6198
Value in MD 316* ... 198
As stated above, the reference point determines the compensation point at which leadscrew
error compensation is activated following reference point approach. No compensation is
allowed at this compensation point!
12–6 © Siemens AG 1992 All Rights Reserved 6FC5197- AA50
SINUMERIK 840C (IA)