Siemens 611-D, 840C 12.18 Functional description of gearbox interpolation (up to SW 3), 12.18.1 Corresponding data

12 Functional Descriptions 07.97

12.18 Functional description of gearbox interpolation (up to SW 3)

12.18 Functional description of gearbox interpolation (up to SW 3)

The functionality GEARBOX INTERPOLATION (GI) is

subdivided into the following 3 options:

•GI full package with the full range of functions

described below

•Gantry axes with restrictions:

- Only 1 leading axis for each

following axis

- Fixed link factor of ±1:1

-Not NC-programmable

•Synchronous spindle with the restriction:

- Only 1 leading spindle for each

following spindle

12.18.1 Corresponding data

Machine data

• NC MD 312, 313 Assignment mixed I/O for emergency retraction to one mode

group

• NC MD 5006 Bit 4 Key switch interlock of input display

• NC MD 588*/528* Tilting output bit on emergency retraction

• NC MD 1328* Substitute time constant of setpoint filter

• NC MD 1420*/487* Parameter for compensatory controller of following

axis/spindle, P-component

• NC MD 1424*/488* Parameter for compensatory controller of following

axis/spindle, I-component

• NC MD 1428*/489* Parameter for compensatory controller of following

axis/spindle, D-component

• NC MD 1432*/490* Time constant parallel model for following axis/spindle

• NC MD 1436*/491* Tolerance band for fine synchronism of following axis/spindle

• NC MD 1440*/492* Tolerance band for coarse synchronism of following

axis/spindle

• NC MD 1444*/493* Emergency retraction threshold for following axis/spindle

• NC MD 1448*/494* % warning threshold n

max

and a

max

for following axis/spindle

• NC MD 1452*/495* Delay controlled follow-up for following axis/spindle

• NC MD 1456*/496* Default setting for link structure

• NC MD 1736*-1768* Alarm limit velocity 1st-8th PaSe

• NC MD 1844*/525* Bit 0 Axis/spindle may be FA/FS

• NC MD 1844*/525* Bit 1 Reconfiguration allowed

• NC MD 1844*/525* Bit 2 Switchover of link factor allowed

• NC MD 1844*/525* Bit 3 Overwriting of positions allowed

• NC MD 1844* Bit 4 LINK_ON after Power On

• NC MD 1844*/525* Bit 5 Test bit compensatory controller

• NC MD 1848*/526* Bit 2 Block change with synchronism fine

• NC MD 1848*/526* Bit 3 Suppression of acceleration limitation

• NC MD 1848* Bit 4 FA overlay, index-related

• NC MD 1848*/526* Bit 5 Block change after synchronism reached

• NC MD 1848*/526* Bit 7 Synchronization in tooth pitch

• NC MD 1852*/527* Bit 0 Reference system GI positions for synchronization

• NC MD 1852*/527* Bit 1 Include DRF and preset in calculation for synchronization

• NC MD 1852*/527* Bit 2 Include G54 to G57 in calculation for synchronization

• NC MD 1852*/527* Bit 3 Include external ZO in calculation for synchronization

• NC MD 1852*/527* Bit 4 Include G58 and G59 in calculation for synchronization

• NC MD 1852*/527* Bit 5 Include tool length compensation in calculation for

synchronization

• NC MD 1856*/531* Bit 4 Synchronization time-optimized

• NC MD 2522*-2529* Alarm limit speed 1st-8th PaSe

12–128

SINUMERIK 840C (IA)