Siemens 611-D, 840C 312*, 320*

12.93 6 NC Machine Data (NC MD), NC Setting Data (NC SD)

6.12.1 NC setting data (NC SD)

Scale centre NC

312*

Default value Lower input limit Upper input limit Units

0 – 99 999.999 + 99 999.999 mm or inches

Active on

–

The scale centre defines where the reference point for the alteration of the programmed axis

positions using the scale factor lies (see Programming Guide for detailed description).

The scale centre is programmed together with G51 in the block.

Clamping torque for move against fixed stop

320*

Default value Lower input limit Upper input limit Units

0 1 999 0.1 %

Active on

–

This SD is used to define the desired clamping torque as a % of the max. torque of the

component. Input in units of 0.1 %

6–225

SINUMERIK 840C (IA)