Cisco Systems ASR 1000 Series manual Chassis Rear Rack-Mount Brackets

Chapter 4 Cisco ASR 1006 Router Overview and Installation

Attaching the Chassis Rack-Mount Brackets

Step 2 Position the front rack-mount bracket top hole with the chassis first top hole behind the side vent holes (see Figure 4-6).

Step 3 Insert and tighten the black screws on one side.

Step 4 Repeat Step 1 through Step 3 on the other side of the chassis. Use black screws to secure the rack-mount brackets to the chassis.

Step 5 Install the chassis in the rack. To install the Cisco ASR 1006 Router in a rack, go to Installing the Cisco ASR 1006 Router in a Rack, page 4-12.

This completes the steps for attaching the front rack-mount brackets to the Cisco ASR 1006 Router.

Chassis Rear Rack-Mount Brackets

If you are rack mounting the chassis using the rear rack-mount brackets, then this type of installation provides for the chassis being recessed in the rack.

To install the front rack-mount brackets on a Cisco ASR 1006 Router, complete the following steps:

Step 1 Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear t rack-mount bracket with the ear and holes facing outward and towards the rear of the chassis (see Figure 4-7).

Figure 4-7shows where to attach the rear rack-mount brackets to the Cisco ASR 1006 Router.

	Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
4-10	OL-13208-03