Chapter 3 Preparing Your Site for Installation
Standard Warning Statements
Warning No
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning To comply with the Class A emissions requirements shielded twisted pair T1/E1 cables must be used for
Warning To comply with Class A emissions requirements- shielded management Ethernet, CON, and AUX cables on the Cisco ASR1002 must be used.
Warning Power cable and AC adapter - When installing the product, please use the provided or designated connection cables/power cables/AC adaptors. Using any other cables or adapters could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of certified cables (that have the ‘UL’ shown on the code) for any other electrical devices than products designated by Cisco. The use of cables that are certified by Electrical Appliance and Material Safety Law (that have ‘PSE’ shown on the code) is not limited to
Warning Only trained and qualified personnel should be allowed to install or replace this equipment Statement 1030
Warning This product relies on the building’s installation for
Warning This product requires
Warning This unit may have more than one power supply connection. All connections must be removed to
Warning The
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
|
| ||
|
|
