Cisco Systems ASR 1000 Series Minor Amber Minor alarm indicator, Major Red Major alarm indicator

Chapter 2 Cisco ASR 1000 Series Routers Components

Cisco ASR 1000 Series Route Processor

Figure 2-3 Embedded Cisco ASR1000-RP1 LEDs

ASR 1002

pwr	min
stat	maj
	crit

250603

The embedded route processors for the Cisco ASR 1002 Router provides connection for one SPA bay and the circuitry for the a built-in 4xGE SPA.

The Cisco route processor for ASR 1002 Router meets the requirements of route processors for the Cisco ASR 1006 and the Cisco ASR 1004 routers; except for the following deviations:

•No SATA hard drive supported. Bulk file storage is on a large fixed eUSB device (up to 8GB (bytes) supported).

•No support for redundant route processors.

•Hardware memory and storage options (such as DRAM) are not field upgradeable.

•Network clock changes. No second BITS clock input supported.

•The LED order is from top to bottom on the route processor is MIN, MAJ, CRIT.

Table 2-3lists the Cisco embedded ASR1000-RP1 LEDs and behaviors.

Table 2-3	Cisco Embedded ASR1000-RP1 LEDs in the Cisco ASR 1002 Router
LED Label	LED	Color —State	Behavior Description
PWR	Power	Solid green	All power requirements are within
			specification
		Off	Off, the router is in standby mode.
STAT	System status	Solid green	Cisco IOS has successfully booted.
		Yellow	ROMMON is running or when the Process
			Manager declares that a critical ASR 1000
			Series RP1 process is not running
		Red	System failure or powering up.
MIN	Minor	Amber	Minor alarm indicator.
MAJ	Major	Red	Major alarm indicator.
CRIT	Critical	Red	Critical alarm indicator.
BOOT	eUSB0 FLASH	Flashing Green	Activity indicator.
	(BootDisk
		Off	No activity.
CARRIER		Off	Out of service or not configured.
		Green	In frame and working properly.
		Amber	Fault or loop condition.

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

OL-13208-03 2-7